Skip to main content

iQ-Keylocks Tips

Please note the following special configuration options for the different Keylock brands:

Ving Vision

  • User Group: GUEST User Type: SINGLE ROOM
  • Must use PMS.exe.
  • Can use serial to IP converter.
  • Not compatible with VTlink.exe
  • roomMaster does not support reading RFID keys

Ving 2100

  • User Group: 1
  • Must be one per workstation
  • Encoder device ID is always 01 no matter how many encoders

Tesa/Onity HT22

  • If more than one key encoder, the encoder attached to the computer running iQ-Keylocks must be set to Master. Contact key vendor for instructions.

Saflok 5000/6000

  • Encoder ID on the workstation must be 3 digit, i.e.001 or 002. Cannot be 1 or 01.
  • SAFLOK 6000 may need password: use 13579. If does not work, check with vendor.

Kaba/Atlas Ilco

  • Single Encoder : Encoder ID must be 00
  • Multiple Encoders : Encoder ID must be 2 digits, i.e. 01, 02, or 03. Keys will be made, but the window in roomMaster will not close because Keylocks will not read success response if Encoder ID not 2 digits
  • PMS Webservice : On Interface tab, set port to COM1 and check the Disable COM option.